Submitted by administrator on Wed, 03/04/2015 - 00:57
For dump trucks with sliding bed, modified from motor trucks, the frame may crack, if the truck is used under extreme conditions, such as repeatedly lifting and lowering the bed with excessive load. If this problem is left unattended, the crack may grow, and in the worst case, the frame might break.
Case Number:
KJ-0311-0
Make/model:
Issued:
Fri, 2006-02-10
Component:
frame
Affected:
140
Correction:
The reinforcing plates should be additionally installed to the frame. If any crack or deformation is found, it should be repaired.
Identification:
white paint on the left spring bracket located on the front of the rear spring, as shown on the diagram with * mark
Vehicle:
Make:
Mitsubishi
Type:
U-FE447C
Period:
23/01/1992..22/09/1993
Frame / Chassis No:
FE447C-560227..FE447C-590109
Make:
Mitsubishi
Type:
U-FE449C
Period:
15/06/1993
Frame / Chassis No:
FE449C-590005
Make:
Mitsubishi
Type:
KC-FE642C
Period:
19/11/1997..27/03/1998
Frame / Chassis No:
FE642C-540001..FE642C-540017
Make:
Mitsubishi
Type:
KC-FE648C
Period:
25/12/1996..11/03/1999
Frame / Chassis No:
FE648C-530002..FE648C-530486
Make:
Mitsubishi
Type:
KC-FE63ECX
Period:
19/04/1999..09/04/2002
Frame / Chassis No:
FE63ECX-550012..FE63ECX-560265
Make:
Mitsubishi
Type:
KK-FE83ECX
Period:
17/07/2002..24/05/2004
Frame / Chassis No:
FE83ECX-500008..FE83ECX-500307
unique_id_feeds:
135963