RJ-0959-1

Submitted by administrator on Wed, 03/04/2015 - 00:53

The rubber in the automatic transmission mount may get damaged from heat degradation caused by long idling etc., due to its poor heat resistance. If left unfixed, in the worst case, the control lever of the automatic transmission interferes with the battery tray bracket. As a result, it may become impossible to shift to the P range, and the ignition key can not be pulled out.

Case Number: 
RJ-0959-1

Make/model:

Issued: 
Tue, 2003-07-01
Component: 
automatic transmission
Affected: 
1 284
Diagram: 

http://carinf.mlit.go.jp/jidosha/carinf/ImgManager?No=1109591

Correction: 
The automatic transmission mount should be replaced with the factory approved replacement unit. This makes vibration worse, so the engine mount should be replaced with the factory approved replacement unit.
Identification: 
white or yellow paint on the lower bolt head on the lower door hinge on the passenger's side
Vehicle: 
Make: 
Mitsubishi
Type: 
GH-S32A
Period: 
N/A
Frame / Chassis No: 
S32A-0000101..S32A-0000726
Make: 
Mitsubishi
Type: 
TA-S32A
Period: 
N/A
Frame / Chassis No: 
S32A-0100102..S32A-5100223
Make: 
Mitsubishi
Type: 
GH-S33A
Period: 
N/A
Frame / Chassis No: 
S33A-0000102..S33A-0000393
Make: 
Mitsubishi
Type: 
TA-S33A
Period: 
N/A
Frame / Chassis No: 
S33A-0100101..S33A-5100157
Make: 
Mitsubishi
Type: 
GH-S43A
Period: 
N/A
Frame / Chassis No: 
S43A-0000026..S43A-0000148
Make: 
Mitsubishi
Type: 
TA-S43A
Period: 
N/A
Frame / Chassis No: 
S43A-0100101..S43A-5100106
unique_id_feeds: 
135156