Submitted by administrator on Wed, 03/04/2015 - 00:54
The processing of the input axis of the 4WD transfer is inadequate, and therefore the oil seal on the manual transmission connected to it may lose the sealing integrity causing the transmission oil to leak. If this problem is left unattended, the gear can be damaged causing abnormal noise, and in the worst case, the vehicle stalls.
Case Number:
RJ-1008-0
Make/model:
Issued:
Tue, 2003-11-25
Component:
M/T
Affected:
1 012
Correction:
The input axis of the transfer should be replaced with a non-defective one, and the oil seal should be replaced with a new one.
Identification:
yellow paint on the left hand side of the inscription of the frame number in the engine compartment
Vehicle:
Make:
Toyota
Type:
KF-CR52V
Period:
N/A
Frame / Chassis No:
CR52-5003122..CR52-5005349:CR52-0007661..CR52-0013173:CR52-5000083
unique_id_feeds:
135309