Submitted by administrator on Wed, 03/04/2015 - 00:53
On certain vehicles, engine vibration may pull the speed sensor wire and the idle rpm control unit wire, because these wires are not properly routed. At worst, the wires get disconnected, and the speed sensor and/or idle rpm control will fail to function properly.
Case Number:
RJ-1122-1
Make/model:
Issued:
Fri, 2004-06-18
Component:
electric wiring in the engine compartment
Affected:
13 067
Correction:
The wiring in the engine compartment should be rerouted. Also, the wires should be inspected, and the one with damage should be either repaired or replaced with a new one.
Identification:
white or yellow paint on the lower bolt head on the lower door hinge on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
E-DE2A
Period:
13/10/1994..03/03/1995
Frame / Chassis No:
DE2A-0000008..DE2A-0001566
Make:
Mitsubishi
Type:
E-DE3A
Period:
03/10/1994..31/10/1995
Frame / Chassis No:
DE3A-0000025..DE3A-0013017
unique_id_feeds:
135232