RJ-1149-0

Submitted by administrator on Wed, 03/04/2015 - 00:54

The bolt securing the rear wheel disc brake caliper may become loose if the vehicle is driven in such a manner as with frequent hard braking, because the processing of the bolt head bearing surface is inadequate. The loose bolt can cause abnormal noise during braking, and in the worst case, it comes off and the caliper comes to contact with the inside of the rear wheel damaging itself.

Case Number: 
RJ-1149-0

Make/model:

Issued: 
Thu, 2004-07-08
Component: 
brake
Affected: 
8
Diagram: 

http://www.toyota.co.jp/recall/2004/drawing/image/0709.gif

Correction: 
The serial/lot numbers on the rear axles should be checked, and the one whose prefix matches W0377 or W0378 should be replaced with a new one, and the bolt should be replaced with a non-defective one.
Identification: 
yellow paint on the left hand side of the inscription of the frame number in the engine compartment
Vehicle: 
Make: 
Toyota
Type: 
CBA-GRS180
Period: 
26/05/2004
Frame / Chassis No: 
GRS180-0010641
Make: 
Toyota
Type: 
CBA-GRS180
Period: 
26/05/2004
Frame / Chassis No: 
GRS180-0010645
Make: 
Toyota
Type: 
CBA-GRS180
Period: 
26/05/2004
Frame / Chassis No: 
GRS180-0010649
Make: 
Toyota
Type: 
CBA-GRS180
Period: 
26/05/2004
Frame / Chassis No: 
GRS180-0010650
Make: 
Toyota
Type: 
CBA-GRS182
Period: 
26/05/2004
Frame / Chassis No: 
GRS182-0019755
Make: 
Toyota
Type: 
CBA-GRS182
Period: 
26/05/2004
Frame / Chassis No: 
GRS182-0019894
Make: 
Toyota
Type: 
CBA-GRS183
Period: 
26/05/2004
Frame / Chassis No: 
GRS183-0003427
Make: 
Toyota
Type: 
CBA-GRS183
Period: 
26/05/2004
Frame / Chassis No: 
GRS183-0003432
unique_id_feeds: 
135334