Submitted by administrator on Wed, 03/04/2015 - 00:56
When the accelerator pedal is depressed all the way, the joint of the engine idling up cable may be caught on the return spring hook due to improper shape of the joint. If this occurs, the accelerator control lever may not return to the position, which would cause the engine revs not to drop.
Case Number:
RJ-1381-0
Make/model:
Issued:
Mon, 2005-02-28
Component:
engine (idling up cable joint)
Affected:
232
Correction:
The idling up cable joint should be replaced with the factory approved replacement unit.
Identification:
white/yellow sticker ('HB-11' is written) on the back of the inspection lid located at the left rear of the vehicle body
Vehicle:
Make:
Mitsubishi
Type:
KC-MP217K
Period:
04/09/1995..13/12/1995
Frame / Chassis No:
MP217K-14001..MP217K-34002
Make:
Mitsubishi
Type:
KC-MP217M
Period:
11/09/1995..05/03/1996
Frame / Chassis No:
MP217M-14001..MK217M-44001
Make:
Mitsubishi
Type:
KC-MP217N
Period:
5/10/1995
Frame / Chassis No:
MP217N-14001
Make:
Mitsubishi
Type:
KC-MP217P
Period:
20/09/1995..10/11/1995
Frame / Chassis No:
MP217P-14001..MP217P-24001
Make:
Mitsubishi
Type:
KC-MP617K
Period:
12/09/1995..02/02/1996
Frame / Chassis No:
MP617K-14001..MP617K-34027
Make:
Mitsubishi
Type:
KC-MP617M
Period:
05/09/1995..15/01/1996
Frame / Chassis No:
MP617M-14003..MP617M-34004
Make:
Mitsubishi
Type:
KC-MP617N
Period:
29/08/1995..08/01/1996
Frame / Chassis No:
MP617N-14001..MP617N-34004
Make:
Mitsubishi
Type:
KC-MP617P
Period:
28/07/1995..26/10/1995
Frame / Chassis No:
MP617P-14001..MP617P-34002
unique_id_feeds:
135698