Submitted by administrator on Wed, 03/04/2015 - 00:57
On certain vehicles, the striker attached to the bonnet, which is a part of the bonnet locking system, is not properly welded, and therefore, the welded section may partly come off. If this problem is left unattended, the striker could separate from the bonnet, in which case the bonnet could open while the vehicle is in motion.
Case Number:
RJ-1476-0
Make/model:
Issued:
Wed, 2005-07-13
Component:
frame and body (bonnet)
Affected:
424
Correction:
The bonnet should be replaced with a non-defective one.
Identification:
yellow paint on the bolt for the lower hinge of the driver's side door
Vehicle:
Make:
Mazda
Type:
E-FD3S
Period:
19/01/1996..31/01/1996
Frame / Chassis No:
FD3S-400278..FD3S-400711
unique_id_feeds:
135827