Submitted by administrator on Wed, 03/04/2015 - 00:57
On certain vehicles modified to carry a wheelchair, the brackets to secure the brake hoses onto the vehicle body may not be properly welded. If this problem is left unattended, the welded sections may come off due to vibration and impact during driving, causing the hoses to interfere with the surroundings, and in the worst case, brake fluid could leak, which would result in reduced braking efficiency.
Case Number:
RJ-1611-0
Make/model:
Issued:
Thu, 2006-02-02
Component:
brake hoses
Affected:
154
Correction:
The brake hose brackets should be secured with nuts and bolts. If the welded sections are not in a good condition, the brake hoses should be replaced with new ones.
Identification:
yellow paint beside the inscription of the frame number in the engine compartment
Vehicle:
Make:
Daihatsu
Type:
LE-S320V(modified)
Period:
11/11/2005..06/01/2006
Frame / Chassis No:
S320V-0035422..S320V-0042214
Make:
Daihatsu
Type:
LE-S330V(modified)
Period:
15/11/2005..28/12/2005
Frame / Chassis No:
S330V-0017323..S330V-0020445
Make:
Daihatsu
Type:
TA-S320G(modified)
Period:
30/11/2005..06/01/2006
Frame / Chassis No:
S320G-0012221..S320G-0013673
Make:
Daihatsu
Type:
TA-S330G(modified)
Period:
06/12/2005..28/12/2005
Frame / Chassis No:
S330G-0005439..S330G-0006230
unique_id_feeds:
135976