Submitted by administrator on Wed, 03/04/2015 - 00:57
For the seat belts on the most back seats, the brackets are placed in a tilted position, because the bracket bolt holes on the floorboard are not of the right size. If this problem is left unattended, the bolts may loosen, and in the worst case, the seat belts might fail to restrain the passengers in the case of a collision.
Case Number:
RJ-1664-0
Make/model:
Issued:
Wed, 2006-05-24
Component:
seat belts (seat belt brackets)
Affected:
40
Correction:
The floorboard for the most back seats should be replaced with the factory approved replacement unit.
Identification:
white/yellow sticker (marked 'MB-10') on the back of the inspection lid located at the left rear of the vehicle body
Vehicle:
Make:
Mitsubishi
Type:
PA-MK25FJ
Period:
15/09/2005..15/12/2005
Frame / Chassis No:
MK25FJ-23028..MK25FJ-23046
Make:
Mitsubishi
Type:
PA-MK26FJ
Period:
27/11/2004..23/11/2005
Frame / Chassis No:
MK26FJ-23002..MK26FJ-23050
Make:
Mitsubishi
Type:
PA-MK27FH
Period:
25/03/2005
Frame / Chassis No:
MK27FH-23026
unique_id_feeds:
136021