Submitted by administrator on Wed, 03/04/2015 - 00:58
For hybrid vehicles, the metal protective lid of the DC-DC converter does not have sufficient strength, and therefore, when the back of the rear seat is pressed by the weight of a passenger, the lid may distort and interfere with the insulation rubber cap of the electrical terminal. If this problem is left unattended, the cap may be damaged, and in the worst case, the terminal and the lid may short-circuit, in which case the main fuse could break, and the engine could stop and fail to restart.
Case Number:
RJ-1818-0
Make/model:
Issued:
Thu, 2007-02-08
Component:
DC-DC converter cable
Affected:
7 219
Correction:
The stay and the resin cover should be additionally installed to prevent the interference of the electrical terminal and the protective lid.
Identification:
white paint on the head of the upper bolt on the lower hinge of the right rear door
Vehicle:
Make:
Honda
Type:
DAA-FD3
Period:
09/09/2005..02/09/2006
Frame / Chassis No:
FD3-1000005..FD3-1007223
unique_id_feeds:
136095