Submitted by administrator on Wed, 03/04/2015 - 00:58
There is a possibility that the bush of the head idler gear for the camshaft is made of an inappropriate material, and therefore, it may prematurely wear and cause the gear to rattle. If this problem is left unattended, excessive stress may be exerted on the brim of the shaft, and the brim may break. If this occurs, the gear may interfere with the surrounding parts, making abnormal noise, or engine oil may leak, and at worst, interlocking between the gears could be lost, in which case the engine would stop and would not restart.
Case Number:
RJ-1839-0
Make/model:
Issued:
Fri, 2007-03-09
Component:
engine
Affected:
1 067
Correction:
The subject gear assembly should be replaced with a quality assured item, and the securing shaft should be replaced with a new one.
Identification:
sticker (marked '1839') near the door striker on the driver's side
Vehicle:
Make:
Nissan
Type:
PA-AHW41
Period:
N/A
Frame / Chassis No:
AHW41-030002..AHW41-035017
Make:
Nissan
Type:
PA-AVW41
Period:
N/A
Frame / Chassis No:
AVW41-030004..AVW41-035006
Make:
Nissan
Type:
PA-AJW41
Period:
N/A
Frame / Chassis No:
AJW41-030003..AJW41-035002
Make:
Nissan
Type:
PA-ACW41
Period:
N/A
Frame / Chassis No:
ACW41-030003..ACW41-030024
unique_id_feeds:
136137