Submitted by administrator on Wed, 03/04/2015 - 00:59
For the steering gear, the tightening torque of the nuts securing the pinion shaft may decrease due to improper manufacturing of the nuts. Therefore, there is a risk that the nuts may gradually loosen, and in the worst case, the pinion shaft could slip out and steering would become impossible.
Case Number:
RJ-2392-1
Make/model:
Issued:
Tue, 2009-10-13
From:
2007-07-04
To:
2009-07-17
Component:
steering assembly (pinion shaft)
Affected:
82 587
Correction:
The pinion shaft nuts should be checked for tightening, and clamps that prevent nuts from turning should be installed.
Identification:
silver sticker on the right hand side of the model number plate
Reporting Company:
NISSAN
Vehicle:
Make:
NISSAN
Type:
DBA-NT31
Period:
04/07/2007..21/05/2009
Frame / Chassis No:
NT31-000001..NT31-044252
Make:
NISSAN
Type:
DBA-T31
Period:
04/07/2007..12/05/2009
Frame / Chassis No:
T31-000001..T31-007577
Make:
NISSAN
Type:
CBA-TNT31
Period:
04/07/2007..12/05/2009
Frame / Chassis No:
TNT31-000001..TNT31-007472
Make:
NISSAN
Type:
LDA-DNT31
Period:
20/08/2008..12/05/2009
Frame / Chassis No:
DNT31-000001..DNT31-002214
Make:
NISSAN
Type:
DBA-KJ10
Period:
06/12/2007..17/07/2009
Frame / Chassis No:
KJ10-000101..KJ10-210776
Make:
NISSAN
Type:
DBA-KNJ10
Period:
06/12/2007..24/06/2009
Frame / Chassis No:
KNJ10-000101..KNJ10-204625
unique_id_feeds:
136713