Submitted by administrator on Wed, 03/04/2015 - 00:59
On certain vehicles, the tightening torque of the back door stay bolt is not sufficient, and therefore, the bolt may loosen from opening/closing the door. If this problem is left unattended, the stay could separate from the door, in which case it would become impossible for the back door to remain wide open.
Case Number:
RJ-2604-2
Make/model:
Issued:
Fri, 2010-09-24
From:
1999-01-18
To:
2010-04-27
Component:
vehicle body (back door stay)
Affected:
8 546
Correction:
The back door stay bolt should be replaced with a thread locking adhesive bolt and tightened to the correct torque. Also, if the nut has separated, it should be replaced with a new one.
Identification:
yellow paint near the right front strut nut in the engine room
Reporting Company:
DAIHATSU
Vehicle:
Make:
DAIHATSU
Type:
GD-S200C, GM-S200C, TE-S200C, LE-S200C
Period:
18/01/1999..08/11/2004
Frame / Chassis No:
S200C-0000052..S200C-0004505
Make:
DAIHATSU
Type:
GD-S200C, GM-S200C, TE-S200C, LE-S200C
Period:
19/01/2005..28/11/2007
Frame / Chassis No:
S200C-2000051..S200C-2001460
Make:
DAIHATSU
Type:
GD-S210C, TE-S210C
Period:
18/01/1999..08/11/2004
Frame / Chassis No:
S210C-0000055..S210C-0001160
Make:
DAIHATSU
Type:
GD-S210C, TE-S210C
Period:
20/11/2005..14/11/2007
Frame / Chassis No:
S210C-2000052..S210C-2000423
Make:
DAIHATSU
Type:
EBD-S201C
Period:
18/12/2007..27/04/2010
Frame / Chassis No:
S201C-0000051..S201C-0001015
Make:
DAIHATSU
Type:
EBD-S211C
Period:
17/12/2007..26/04/2010
Frame / Chassis No:
S211C-0000051..S211C-0000295
unique_id_feeds:
136976