Caldina

RJ-0886-0

Submitted by administrator on Wed, 03/04/2015 - 00:54

On certain vehicles, the check valve pin in the inflator for the passenger airbag may fail to punch the hole in the proper manner to allow the gas to be discharged to the airbag, because the valve is improperly installed. If this happens, the airbag will not be deployed to the appropriate extent, and the passenger could be seriously injured in a frontal collision.

KJ-0203-0

Submitted by administrator on Wed, 03/04/2015 - 00:54

For the front seat belt tensioner (a device which tightens the seat belt when a collision occurs), on certain vehicles, the processing of the screw threads of the casing is inadequate. For this reason, the casing cap may come out ripping through the inside panel due to the pressure from the belt tensioner being triggered, and in the worst case, the cap could hit a driver or a passenger.

RJ-0443-0

Submitted by administrator on Wed, 03/04/2015 - 00:53

On certain 4WD vehicles, the propeller shaft is cracked due to defective welding. If left unfixed for a long time, in the worst case, the propeller shaft breaks causing the vehicle to stall.

RJ-0544-0

Submitted by administrator on Wed, 03/04/2015 - 00:53

On certain 4WD vehicles with automatic transmission, some washers on the spider gears in the front differential are defective in manufacturing. If left unfixed, they may get damaged causing abnormal noises, and in the worst case, the vehicle fails to accelerate normally and becomes stalled.