Submitted by administrator on Wed, 03/04/2015 - 00:52
On certain vehicles, there is no washer or bolt installed for the hub nut that secures the hub bearing in the front axle, and therefore, the hub bearing can become loose causing the vehicle to stall.
Case Number:
RJ-0470-0
Make/model:
Issued:
Thu, 1997-03-06
Component:
axle shaft
Affected:
2 066
Correction:
The hub nuts should be checked, and any missing washers or bolts should be installed. Also, the hub bearings and axle etc. should be inspected, and the one with damage should be replaced with a new one.
Identification:
N/A
Vehicle:
Make:
Isuzu
Type:
E-UBS25GW
Period:
N/A
Frame / Chassis No:
UBS25GW-7220332..UBS25GW-7220555
Make:
Isuzu
Type:
E-UBS25DW
Period:
N/A
Frame / Chassis No:
UBS25DW-7220041..UBS25DW-7220057
Make:
Isuzu
Type:
KD-UBS69GW
Period:
N/A
Frame / Chassis No:
UBS69GW-7279669..UBS69GW-7282777
Make:
Isuzu
Type:
KD-UBS69DW
Period:
N/A
Frame / Chassis No:
UBS69DW-7220187..UBS69DW-7220325
Make:
Isuzu
Type:
KD-UCS69GW
Period:
N/A
Frame / Chassis No:
UCS69GW-7105671..UCS69GW-7105825
Make:
Honda
Type:
E-UBS25GWH
Period:
N/A
Frame / Chassis No:
UBS25GW-7220429..UBS25GW-7220552
Make:
Honda
Type:
KD-UBS69GWH
Period:
N/A
Frame / Chassis No:
UBS69GW-7281280..UBS69GW-7282599
unique_id_feeds:
134979