Submitted by administrator on Wed, 03/04/2015 - 00:52
Engine shake at take-off etc. can cause the metal clip tab to break the wire insulation of the engine control cable due to improper cable wiring. If this happens, a short circuit may occur, which results in the blown fuse, causing the engine to stall and not to start.
Case Number:
RF-0940-0
Make/model:
Issued:
Fri, 2002-03-08
Component:
wiring
Affected:
1 016
Correction:
The wiring should be repositioned and secured with the bracket. If the wire is damaged, it should be either repaired or replaced with a new one depending the nature of the damage.
Identification:
white paint on the head of the left rear bolt of the intake manifold cover
Vehicle:
Make:
Honda
Type:
LA-RL1
Period:
N/A
Frame / Chassis No:
RL1-1300012..RL1-1301121
unique_id_feeds:
135028