RJ-0453-0

Submitted by administrator on Wed, 03/04/2015 - 00:54

For vehicles with the wheelbase of 2810mm (The related recall RJ-0452-0 states the wheelbase is 2180mm), the propeller shaft may vibrate abnormally at the top speed range because the structure of the power train is improper. At worst, the propeller shaft could break causing the vehicle to stall. Incidentally, the factory approved replacement (RJ-0452-0, issued on 6 September 1995) of replacing the propeller shaft with a new one and adjusting the fuel injection pump to decrease the maximum speed was carried out on 208 vehicles.

Case Number: 
RJ-0453-0

Make/model:

Issued: 
Tue, 1995-10-17
Component: 
propeller shaft
Affected: 
470
Diagram: 

http://carinf.mlit.go.jp/jidosha/carinf/ImgManager?No=1104530

Correction: 
The transmission and the propeller shaft should be replaced with the factory approved replacement units. For the vehicles the temporary measure was taken, the fuel injection pump should be re-adjusted to increase the maximum speed to the original setting.
Identification: 
yellow paint on the side (near the rear) of the transmission
Vehicle: 
Make: 
Mazda
Type: 
KC-WGE1T
Period: 
N/A
Frame / Chassis No: 
WGE1T-100002..WGE1T-100091
Make: 
Mazda
Type: 
KC-WG31T
Period: 
N/A
Frame / Chassis No: 
WG31T-100003..WG31T-100042
Make: 
Mazda
Type: 
KC-WG61D
Period: 
N/A
Frame / Chassis No: 
WG61D-100004..WG61D-100153
Make: 
Mazda
Type: 
KC-WG61K
Period: 
N/A
Frame / Chassis No: 
WG61K-100003..WG61K-100119
Make: 
Mazda
Type: 
KC-WG61T
Period: 
N/A
Frame / Chassis No: 
WG61T-100003..WG61T-100057
Make: 
Mazda
Type: 
KC-WG61H
Period: 
N/A
Frame / Chassis No: 
WG61H-100001..WG61H-100020
unique_id_feeds: 
135360