Submitted by administrator on Wed, 03/04/2015 - 00:57
The fuel injection pump control wiring is not properly routed, and therefore, it may disconnect due to vibration at engine stop etc. If this occurs, the warning light might illuminate, and the fuel injection timing might be delayed, which could cause the exhaust gas to exceed the standard.
Case Number:
RJ-1022-0
Make/model:
Issued:
Thu, 2004-01-15
Component:
fuel injection system
Affected:
1 066
Correction:
The additional wiring and the brackets should be installed on the fuel injection pump control wiring. Also, the wiring should be inspected, and any damage should be repaired
Identification:
N/A (The bottom left diagram shows the original wiring, and the bottom right one shows the wiring after the countermeasure.)
Vehicle:
Make:
Nissan Diesel
Type:
KK-MK122A
Period:
N/A
Frame / Chassis No:
MK122A-05001..MK122A-05007
Make:
Nissan Diesel
Type:
KK-MK122B
Period:
N/A
Frame / Chassis No:
MK122B-00001..MK122B-05083
Make:
Nissan Diesel
Type:
KK-MK122C
Period:
N/A
Frame / Chassis No:
MK122C-00002..MK122C-05202
Make:
Nissan Diesel
Type:
KK-MK122E
Period:
N/A
Frame / Chassis No:
MK122E-00001..MK122E-05098
Make:
Nissan Diesel
Type:
KK-MK122G
Period:
N/A
Frame / Chassis No:
MK122G-00002..MK122G-05065
Make:
Nissan Diesel
Type:
KK-MK122H
Period:
N/A
Frame / Chassis No:
MK122H-00001
Make:
Nissan Diesel
Type:
KK-MK12A
Period:
N/A
Frame / Chassis No:
MK12A-00001..MK12A-00439
unique_id_feeds:
135912