KJ-0316-0

Submitted by administrator on Wed, 03/04/2015 - 00:57

The bolt that connects between the horn switch and the steering unit does not have sufficient strength, and therefore, if the airbag is deployed at a very low temperature, the bolt may break from the pressure, which may cause the horn switch to lunge out of the steering unit, and in the worst case, this may result in an injury to a driver or a passenger.

Case Number: 
KJ-0316-0

Make/model:

Issued: 
Thu, 2006-04-06
Component: 
airbag (connecting bolt for the horn switch)
Affected: 
618
Diagram: 

http://www.mlit.go.jp/jidosha/recall/recall06/04/images/recall04-064_i.pdf

Correction: 
The horn switch and the airbag assembly should be replaced with the factory approved replacement units.
Identification: 
yellow paint on the steering shaft joint inside the passenger compartment (See the picture at the bottom of the diagram.)
Vehicle: 
Make: 
Mazda
Type: 
CBA-NCEC
Period: 
02/12/2005..14/02/2006
Frame / Chassis No: 
NCEC-103152..NCEC-104283
unique_id_feeds: 
135982