Submitted by administrator on Wed, 03/04/2015 - 00:57
For vehicles modified for trash collecting, the dump cylinder is not in an appropriate position, and therefore, when the vehicle with load bounces over something like a bump or a pothole, the brake pipe bracket above the rear differential, or both the brake pipe and the brake pipe bracket may interfere with the dump cylinder. If this problem is left unattended, the brake pipe may be damaged, and in the worst case, brake fluid could leak, which could result in reduced braking efficiency.
Case Number:
RJ-1625-3
Make/model:
Issued:
Tue, 2006-02-28
Component:
brake (brake pipe)
Affected:
114
Correction:
Depending on the model, the chassis number and the existence of ABS, the brake pipe and the brake pipe bracket should be replaced with the factory approved replacement units, and the routing of the ABS wiring should be changed. (See the diagram (3) on the second page.)
Identification:
white paint on the brake pipe bracket
Vehicle:
Make:
Isuzu
Type:
KK-FRR33G4
Period:
14/11/2000..14/03/2001
Frame / Chassis No:
FRR33G47000600..FRR33G47000651
Make:
Isuzu
Type:
KK-FRR35D4
Period:
03/10/1999..03/03/2003
Frame / Chassis No:
FRR35D47000260..FRR35D47001316
Make:
Isuzu
Type:
KK-FRR35E4S
Period:
03/03/2004..28/05/2004
Frame / Chassis No:
FRR35E4S7001201..FRR35E4S7001306
Make:
Isuzu
Type:
KK-FRR35G4
Period:
23/10/1999..29/03/2002
Frame / Chassis No:
FRR35G47000246..FRR35G47000964
Make:
Isuzu
Type:
KK-FSR33G4
Period:
14/07/2000..23/03/2001
Frame / Chassis No:
FSR33G47000198..FSR33G47000311
Make:
Isuzu
Type:
PB-NRR35C3
Period:
23/07/2004
Frame / Chassis No:
NRR35C37003437
unique_id_feeds:
135987