Submitted by administrator on Wed, 03/04/2015 - 00:59
For large buses, the accelerator wire may be fixed too firmly to the hole of the accelerator sensor lever, due to improper processing of the hole. If this problem is left unattended, the accelerator wire may break, which would cause the vehicle to stall.
Case Number:
RJ-2302-0
Make/model:
Issued:
Wed, 2009-04-15
Component:
engine (accelerator wire)
Affected:
211
Correction:
The accelerator wire around the hole of the accelerator sensor lever should be inspected, and if it is fixed too firmly to the hole, the accelerator sensor and the accelerator wire should be replaced with quality assured items.
Identification:
white/yellow sticker (marked 'HB77') on the back of the inspection lid located at the left rear of the vehicle body
Vehicle:
Make:
Mitsubishi
Type:
PDG-MM96FH
Period:
04/11/2008..19/03/2009
Frame / Chassis No:
MM96FH-20096..MM96FH-20128
Make:
Mitsubishi
Type:
BKG-MS96JP
Period:
22/10/2008..24/03/2009
Frame / Chassis No:
MS96JP-20822..MS96JP-21007
Make:
Nissan Diesel
Type:
PDG-AM96FH
Period:
04/11/2008..12/03/2009
Frame / Chassis No:
AM96FH-20006..AM96FH-20007
Make:
Nissan Diesel
Type:
BKG-AS96JP
Period:
25/02/2009..20/03/2009
Frame / Chassis No:
AS96JP-20038..AS96JP-20043
unique_id_feeds:
136302