Murano

RJ-2305-0

The material of the engine side intake air duct is not appropriate, and therefore, the duct may constrict due to engine heat and the resonator connections may loosen. If this problem is left unattended, the air duct can come off, which could cause unstable idling and/or poor acceleration. At worst, the engine would stall and would not restart.

RJ-1760-0

For the steering locks of vehicles with intelligent key, the rod of the key cylinder may be longer than desired, due to insufficient instructions for manufacturing. Operating the steering wheel, even when the ignition knob is at 'OFF' position and the shift lever is in the 'P' range, may activate the steering lock with such a long rod.

KJ-0312-0

The fuel tank is installed at an undesirable position due to the design, and therefore, there is a risk that an object on a road may hit the frontal part of the tank. If a sharp object hits the tank, in the worst case, it might penetrate the tank wall, and this could result in a fuel leak. It should be noted that the fuel tank meets the technical standards.

RJ-1613-0

For the seat belts on the rear seats (right and left), they may interfere with the seat back hinges and be cut under the impact of an accident etc., because the rear seats do not have an appropriate structure. If the seat belt is cut, it is unlikely to restrain the occupant.