Submitted by administrator on Wed, 03/04/2015 - 00:58
For the balancers installed on the flip-up back door, there may be a residue of cleaning fluid left inside the damper cases, due to an inappropriate manufacturing process, and this may cause the O-rings to swell. If this occurs, the back door may open faster than the designated speed and hit a person, or it may bounce up and down as a result of hard opening and damage the balancer securing parts. If, in the worst case, either of the balancer securing parts breaks, the back door may fall and hit a person.
Case Number:
KJ-0332-0
Make/model:
Issued:
Thu, 2006-09-28
Component:
vehicle body (back door balancers)
Affected:
65 878
Correction:
The back door balancers should be replaced with the factory approved replacement units. Also, the back door should be inspected, and if there are any cracks, it should be replaced with a new one.
Identification:
green sticker below the ID plate
Vehicle:
Make:
Suzuki
Type:
EBD-DA64V
Period:
24/08/2005..19/07/2006
Frame / Chassis No:
DA64V-100074..DA64V-162694
Make:
Suzuki
Type:
GBD-DA64V
Period:
24/08/2005..18/07/2006
Frame / Chassis No:
DA64V-600016..DA64V-630994
Make:
Suzuki
Type:
ABA-DA64W
Period:
24/08/2005..26/07/2006
Frame / Chassis No:
DA64W-100107..DA64W-153619
Make:
Mazda
Type:
EBD-DG64V
Period:
01/09/2005..19/07/2006
Frame / Chassis No:
DG64V-100002..DG64V-134049
Make:
Mazda
Type:
GBD-DG64V
Period:
30/08/2005..17/07/2006
Frame / Chassis No:
DG64V-600001..DG64V-630239
Make:
Mazda
Type:
ABA-DG64W
Period:
02/09/2005..27/07/2006
Frame / Chassis No:
DG64W-100003..DG64W-131984
unique_id_feeds:
136051