Submitted by administrator on Wed, 03/04/2015 - 00:53
For the vacuum brake booster, engine combustion products may get accumulated inside the booster pipe, due to the improper position of the port (brake nipple) located on the intake manifold. If left unfixed, in the worst case, damping force decreases when a brake pedal is operated repeatedly in a short time period.
Case Number:
RJ-0629-1
Make/model:
Issued:
Tue, 2000-05-23
Component:
vacuum brake booster
Affected:
159 739
Correction:
The vacuum hose for the vacuum brake booster should be replaced with the factory approved replacement unit. Also, for vehicles whose resonator of the engine does not have a vacuum port, the resonator should be replaced with the one with a port, and the vacuum port on the intake manifold of the engine should be capped.
Identification:
white or yellow paint on the left hand side of the vehicle type plate inside the engine compartment
Vehicle:
Make:
Mitsubishi
Type:
GF-EA3A
Period:
N/A
Frame / Chassis No:
EA3A-0200001..EA3A-0300684
Make:
Mitsubishi
Type:
GF-EC3A
Period:
N/A
Frame / Chassis No:
EC3A-0200002..EC3A-0300253
Make:
Mitsubishi
Type:
GF-EA3W
Period:
N/A
Frame / Chassis No:
EA3W-0200002..EA3W-0302403
Make:
Mitsubishi
Type:
GF-EC3W
Period:
N/A
Frame / Chassis No:
EC3W-0200001..EC3W-0301342
Make:
Mitsubishi
Type:
GF-N64WG
Period:
N/A
Frame / Chassis No:
N64W-0200001..N64W-0201591
Make:
Mitsubishi
Type:
GF-N74WG
Period:
N/A
Frame / Chassis No:
N74W-0000010..N74W-0201158
Make:
Mitsubishi
Type:
GF-N84W
Period:
N/A
Frame / Chassis No:
N84W-0000012..N84W-0133368
Make:
Mitsubishi
Type:
GF-N94W
Period:
N/A
Frame / Chassis No:
N94W-0000024..N94W-0114748
unique_id_feeds:
135080