Submitted by administrator on Wed, 03/04/2015 - 00:55
For the fusible link of the lights etc. circuit on ambulances with high specifications, the capacity is insufficient and the shape of the terminals is improper, and therefore, continuous use of the electric system with high load can cause the terminals to heat. The heat can cause the resin of the terminals to melt, and the melted resin may go between the terminals breaking electrical continuity, in which case the head lights, width indicators, break lights, hazard lights, horn, and/or defroster may fail to illuminate or function.
Case Number:
RJ-0791-0
Make/model:
Issued:
Thu, 2001-11-22
Component:
fuse
Affected:
82
Correction:
(1) The fusible link holder with terminals should be installed on the top of the battery and connected to the existing harness, and the fusible link of the main power supply circuit should be moved to the holder. (2) The fusible link of the lights etc. circuit should be replaced with the factory approved replacement unit, which should be installed on the spot where the fusible link of the main power supply circuit used to be.
Identification:
the fusible link of the main power supply circuit on the top of the battery
Vehicle:
Make:
Isuzu
Type:
E-JFEGE24(modified)
Period:
N/A
Frame / Chassis No:
FEGE24-805005..FEGE24-805010
Make:
Nissan
Type:
E-FEGE24(modified)
Period:
N/A
Frame / Chassis No:
FEGE24-000482..FEGE24-010388
unique_id_feeds:
135551