Submitted by administrator on Wed, 03/04/2015 - 00:53
For the passenger airbag inflator, on some vehicles, the sufficient air tightness was not achieved, because the reference value set for the air tightness test was incorrect. As a result, the lack of gas enclosed in the inflator may delay airbag deployment at the time of airbag activation. At worst, a passenger may suffer from excessive damage in frontal collision.
Case Number:
RJ-1101-0
Make/model:
Issued:
Fri, 2004-06-04
Component:
airbag (inflator)
Affected:
115
Correction:
The manufacturing number of the passenger airbag should be checked, and if it is the one recalled, the passenger airbag assembly should be replaced with a non-defective item.
Identification:
white or yellow paint on the upper bolt head on the upper door hinge of the right rear door
Vehicle:
Make:
Mitsubishi
Type:
E-EA1A
Period:
21/11/1996..21/01/1997
Frame / Chassis No:
EA1A-0009106..EA1A-0014245
Make:
Mitsubishi
Type:
E-EC1A
Period:
15/01/1997
Frame / Chassis No:
EC1A-0000246
Make:
Mitsubishi
Type:
E-EC5A
Period:
22/11/1996..13/12/1996
Frame / Chassis No:
EC5A-0001460..EC5A-0001896
Make:
Mitsubishi
Type:
E-EA1W
Period:
18/11/1996..14/01/1997
Frame / Chassis No:
EA1W-0002635..EA1W-0006297
Make:
Mitsubishi
Type:
E-EC1W
Period:
9/01/1997
Frame / Chassis No:
EC1W-0000186
Make:
Mitsubishi
Type:
E-EA4W
Period:
05/12/1996..13/12/1996
Frame / Chassis No:
EA4W-0000938..EA4W-0000996
Make:
Mitsubishi
Type:
E-EC4W
Period:
28/11/1996..08/01/1997
Frame / Chassis No:
EC4W-0001745..EC4W-0002103
Make:
Mitsubishi
Type:
E-EA5W
Period:
21/12/1996..25/12/1996
Frame / Chassis No:
EA5W-0001350..EA5W-0001381
Make:
Mitsubishi
Type:
E-EC5W
Period:
15/11/1996..24/01/1997
Frame / Chassis No:
EC5W-0010798..EC5W-0015623
unique_id_feeds:
135218