Submitted by administrator on Wed, 03/04/2015 - 00:53
On certain vehicles, the nut securing the rear propeller shaft to the rear differential carrier may become loose with a repetition of starts etc., because it is not properly tightened. At worst, the shaft joint comes off, and the vehicle becomes stalled.
Case Number:
RJ-1118-0
Make/model:
Issued:
Fri, 2004-06-18
Component:
propeller shaft
Affected:
129
Correction:
The nuts should be checked for the torque, and the loose ones should be tightened to the correct torque.
Identification:
white or yellow paint on the lower bolt head of the door-check on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
E-H56A
Period:
13/03/1995..21/03/1995
Frame / Chassis No:
H56A-0021767..H56A-0023246
unique_id_feeds:
135228