Submitted by administrator on Wed, 03/04/2015 - 00:53
The wire harness may interfere with the edge of the side frame, because it is not properly routed. If left unfixed, in the worst case, a short circuit and a blown fuse are caused, resulting in engine starting failure, incorrect speedometer readings and no illumination of reversing lights etc., and a fire could be caused by a short circuit depending on the wire.
Case Number:
RJ-1121-0
Make/model:
Issued:
Fri, 2004-06-18
Component:
electric wiring in the engine compartment
Affected:
2 521
Correction:
The edge protector should be placed on the side frame, and the hard protective tube and the heat resistance sheet should be fitted on the wire harness. Also, the wires should be inspected, and the one with damage should be either repaired or replaced with a new one.
Identification:
white or yellow paint on the lower bolt head on the lower door hinge on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
E-PD6W
Period:
21/04/1994..12/12/1994
Frame / Chassis No:
PD6W-0000006..PD6W-0001731
Make:
Mitsubishi
Type:
E-PF6W
Period:
18/04/1994..06/12/1994
Frame / Chassis No:
PF6W-0000201..PF6W-0001193
unique_id_feeds:
135231