RJ-1146-2

Submitted by administrator on Wed, 03/04/2015 - 00:52

For the fuel pump inside the fuel tank, the installation structure of the regulator valve cap is not adequate, and therefore, fuel can permeate the cap and cause it to swell, and as a result the cap could become loose. If this problem is left unattended and an impact is caused on the fuel tank when driving over the curb etc., the cap may come off causing the regulator valve to fall off, in which case, the engine does not get fuel, so it stops and will not restart.

Case Number: 
RJ-1146-2

Make/model:

Issued: 
Wed, 2004-06-30
Component: 
fuel pump
Affected: 
56 966
Diagram: 

http://www.mlit.go.jp/jidosha/recall/recall04/06/images/honda06-301-2.gif

Correction: 
The regulator valve cap should be fitted with the clip that prevents the cap separating.
Identification: 
yellow paint on the bolt head on the door hinge of the right rear door
Vehicle: 
Make: 
Honda
Type: 
UA-UC1
Period: 
15/05/2003..25/12/2003
Frame / Chassis No: 
UC1-1000056..UC1-1010037
Make: 
Honda
Type: 
UA-UC1
Period: 
01/08/2003..09/12/2003
Frame / Chassis No: 
UC1-5000001..UC1-5000008
Make: 
Honda
Type: 
DBA-UC1
Period: 
15/01/2004..29/01/2004
Frame / Chassis No: 
UC1-1050001..UC1-1050210
Make: 
Honda
Type: 
DBA-UC1
Period: 
11/02/2004..09/06/2004
Frame / Chassis No: 
UC1-1050211..UC1-1051822
Make: 
Honda
Type: 
DBA-UC1
Period: 
19/02/2004..14/05/2004
Frame / Chassis No: 
UC1-5050001..UC1-5050008
unique_id_feeds: 
135046