Submitted by administrator on Wed, 03/04/2015 - 00:56
The bracket on which the clamp for the high-pressure pipe is secured may break from engine vibration due to a lack of strength. If this problem is left unattended, the pipe may crack, allowing fuel to leak, and in the worst case, the engine would stall and would not restart.
Case Number:
RJ-1393-2
Make/model:
Issued:
Wed, 2005-03-23
Component:
fuel system (fuel injector clamps)
Affected:
875
Correction:
The bracket on which the clamp for the high-pressure pipe is secured should be replaced with the factory approved replacement unit.
Identification:
white/yellow sticker ('HD-26' is written) near the striker on the rear door pillar on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
KC-FP543DR
Period:
17/09/1996..25/01/2000
Frame / Chassis No:
FP543D-500004..FP543D-700001
Make:
Mitsubishi
Type:
KC-FV513HR
Period:
28/08/1996..17/03/2000
Frame / Chassis No:
FV513H-500004..FV513H-710020
unique_id_feeds:
135709