Submitted by administrator on Wed, 03/04/2015 - 00:56
The bolts for the brackets securing the shift rod and the select rod in the transmission may be loose due to insufficient tightening. If this problem is left unattended, the bolts may come off, and in the worst case, it would become impossible to change gear.
Case Number:
RJ-1472-0
Make/model:
Issued:
Wed, 2005-06-29
Component:
transmission (shift rod and select rod)
Affected:
7
Correction:
The bolts should be replaced with new ones and be tightened to the specified torque.
Identification:
white/yellow sticker (marked 'LB-05') below the vehicle model plate located on the right hand side of the accelerator pedal
Vehicle:
Make:
Mitsubishi
Type:
PA-BE64DG
Period:
31/05/2005..02/06/2005
Frame / Chassis No:
BE64DG-400195..BE64DG-400201
Make:
Mitsubishi
Type:
PA-BE63DG
Period:
02/06/2005..07/06/2005
Frame / Chassis No:
BE63DG-400267..BE63DG-400269
Make:
Mitsubishi
Type:
PA-BE63DE
Period:
02/06/2005..08/06/2005
Frame / Chassis No:
BE63DE-400159..BE63DE-400163
unique_id_feeds:
135824