Submitted by administrator on Wed, 03/04/2015 - 00:57
The clutch shaft and the operation lever are not properly welded and lack strength. If this problem is left unattended, the welded section may come off after a certain number of clutch operations, and in the worst case, a clutch operation would become impossible and the vehicle would stall.
Case Number:
RJ-1600-0
Make/model:
Issued:
Fri, 2006-01-13
Component:
clutch
Affected:
48
Correction:
The welded section on the clutch shaft and the operation lever should be inspected, and if it seems to be defective, the clutch shaft should be replaced with a non-defective one.
Identification:
yellow paint on the operation lever of the clutch shaft
Vehicle:
Make:
Isuzu
Type:
PJ-CXG51X5
Period:
9/12/2004
Frame / Chassis No:
CXG51X5-7000025
Make:
Isuzu
Type:
KL-CXZ51K4
Period:
07/12/2004..08/12/2004
Frame / Chassis No:
CXZ51K4-7000662..CXZ51K4-7000669
Make:
Isuzu
Type:
KL-CYG51Y4
Period:
7/12/2004
Frame / Chassis No:
CYG51Y4-7000013
Make:
Isuzu
Type:
KL-CYJ51W4
Period:
07/12/2004..08/12/2004
Frame / Chassis No:
CYJ51W4-7000317..CYJ51W4-7000320
Make:
Isuzu
Type:
PJ-CYJ51W5, PJ-CYJ51W5A
Period:
07/12/2004..08/12/2004
Frame / Chassis No:
CYJ51W5-7000894..CYJ51W5-7000913
Make:
Isuzu
Type:
KL-CYL51V4
Period:
07/12/2004..09/12/2004
Frame / Chassis No:
CYL51V4-7000357..CYL51V4-7000361
Make:
Isuzu
Type:
PJ-CYL51V5, PJ-CYL51V5A
Period:
06/12/2004..09/12/2004
Frame / Chassis No:
CYL51V5-7000828..CYL51V5-7000849
Make:
Isuzu
Type:
KL-CYM51P4
Period:
7/12/2004
Frame / Chassis No:
CYM51P4-7000028
Make:
Isuzu
Type:
PJ-CYM51V5
Period:
07/12/2004..08/12/2004
Frame / Chassis No:
CYM51V5-7000081..CYM51V5-7000084
Make:
Isuzu
Type:
KL-CYZ51P4
Period:
8/12/2004
Frame / Chassis No:
CYZ51P4-7000084
Make:
Isuzu
Type:
PJ-CYZ51Q5
Period:
07/12/2004..08/12/2004
Frame / Chassis No:
CYZ51Q5-7000053..CYZ51Q5-7000054
Make:
Isuzu
Type:
PJ-CYZ51V5
Period:
7/12/2004
Frame / Chassis No:
CYZ51V5-7000067
unique_id_feeds:
136033