Submitted by administrator on Wed, 03/04/2015 - 00:58
The capacitor inside the control unit of the VSA (Vehicle Stability Assist) might have been damaged at the factory. The damaged capacitor can't sufficiently cancel the electrical noise caused by power voltage fluctuation, and the electrical noise may cause the sensor that measures how far the brake pedal is pressed to malfunction. If this occurs, the brake assist may temporarily engage, and in the worst case, the brake might unexpectedly operate without the braking lights illuminated.
Case Number:
RJ-1904-0
Make/model:
Issued:
Thu, 2007-07-05
Component:
brake (VSA modulator)
Affected:
27 841
Correction:
The electrical wiring with the capacitor should be additionally installed to the VSA modulator control unit.
Identification:
additonal capacitor
Vehicle:
Make:
Honda
Type:
LA-RB1
Period:
06/10/2003..08/01/2004
Frame / Chassis No:
RB1-1000024..RB1-1006063
Make:
Honda
Type:
LA-RB2
Period:
06/10/2003..26/12/2003
Frame / Chassis No:
RB2-1000021..RB2-1001016
Make:
Honda
Type:
ABA-RB1
Period:
07/01/2004..04/08/2004
Frame / Chassis No:
RB1-1050001..RB1-1073580
Make:
Honda
Type:
ABA-RB2
Period:
07/01/2004..20/08/2004
Frame / Chassis No:
RB2-1050001..RB2-1054451
unique_id_feeds:
136176