Submitted by administrator on Wed, 03/04/2015 - 00:58
For the main harness, the wiring for the headlights is not properly routed, and therefore, there is a risk that rainwater etc. may enter from the left headlight end connector and that it may run alongside the wire and sit inside the floor harness end connector. If this occurs, the terminals may corrode, and in the worst case, the headlights could fail.
Case Number:
RJ-2243-0
Make/model:
Issued:
Fri, 2009-01-16
Component:
headlights (electrical wiring)
Affected:
103 040
Correction:
The main harness should be replaced with the factory approved replacement unit. Also, The floor harness end connector should be inspected, and if there is corrosion inside, it should be replaced with a new one.
Identification:
green sticker on the ID plate
Vehicle:
Make:
Suzuki
Type:
EBD-DA63T
Period:
14/11/2005..27/02/2007
Frame / Chassis No:
DA63T-410001..DA63T-494090
Make:
Suzuki
Type:
EBD-DA65T
Period:
18/11/2005..14/06/2007
Frame / Chassis No:
DA65T-100050..DA65T-114516
Make:
Mazda
Type:
EBD-DG63T
Period:
14/11/2005..17/01/2007
Frame / Chassis No:
DG63T-410001..DG63T-414669
unique_id_feeds:
136285