RJ-2499-0

Submitted by administrator on Wed, 03/04/2015 - 00:59

For certain vehicles with manual transmissions, the clip that secures the oil pressure pipe on the clutch master cylinder does not have sufficient strength, and therefore, it may be damaged from oil pressure generated by clutch operation. If this occurs and the pipe comes out, the clutch fluid would leak, which could make clutch operation impossible.

Case Number: 
RJ-2499-0

Make/model:

Issued: 
Thu, 2010-04-08
From: 
2007-09-07
To: 
2010-02-10
Component: 
clutch master cylinder
Affected: 
2 407
Diagram: 

http://www.mlit.go.jp/common/000111878.pdf

Correction: 
The clip should be replaced with the factory approved replacement unit.
Identification: 
white or yellow paint on the clutch pipe (near the clutch master cylinder)
Reporting Company: 
MITSUBISHI
Vehicle: 
Make: 
MITSUBISHI
Type: 
CBA-CZ4A
Period: 
07/09/2007..10/02/2010
Frame / Chassis No: 
CZ4A-0000211..CZ4A-0200630
unique_id_feeds: 
136950