Skyline

RJ-2550-0

Submitted by administrator on Wed, 03/04/2015 - 00:59

For the combination switch for the turn indicators etc., abrasion powder generated during the turn indicator's operation may accumulate on the circuit, because the surface of the terminals are not perfectly smooth due to improper polishing process. As a result, when the combination switch is operated, a contact failure may occur, in which case the turn indicator could fail to operate.

RJ-2431-0

Submitted by administrator on Wed, 03/04/2015 - 00:59

For the driver's seat airbag, there may be a part with different specifications due to the wrong order of switch parts, and therefore the airbag's ability to save lives in an offset collision may not meet the safety standards.

RJ-0887-0

Submitted by administrator on Wed, 03/04/2015 - 00:54

For police vehicles, the wire cable that receives the speed signal from the manual transmission can break from metal fatigue due to improper wiring, and in which case both the speed radar system and the speedometer stop working.

RJ-0947-0

Submitted by administrator on Wed, 03/04/2015 - 00:54

The ground line in the fuel pump control module is not properly fitted, and therefore, the fuel pump does not function properly causing unstable engine operation, and in the worst case, the engine stalls and will not restart.