Submitted by administrator on Wed, 03/04/2015 - 00:52
The sealing bolt for the reduction gear shaft is not sealed in an appropriate way, and therefore, the sealant can be displaced due to the shock stress on the joint between the reduction gear and the shaft from high speed driving. In extreme cases, the reduction gear shaft could come off causing the vehicle to stall.
Case Number:
RJ-0583-0
Make/model:
Issued:
Wed, 1999-08-18
Component:
A/T
Affected:
29 060
Correction:
The sealing bolt should be replaced with the factory approved replacement unit that has an O-ring instead of sealant.
Identification:
yellow paint on the sealing bolt
Vehicle:
Make:
Honda
Type:
E-KA8
Period:
N/A
Frame / Chassis No:
KA8-1401548..KA8-1401951
Make:
Honda
Type:
E-KA9
Period:
N/A
Frame / Chassis No:
KA9-1000038..KA9-1015382:KA9-1100018..KA9-1102766
Make:
Honda
Type:
GF-KA9
Period:
N/A
Frame / Chassis No:
KA9-1200023..KA9-1203401
Make:
Honda
Type:
E-UA3
Period:
N/A
Frame / Chassis No:
UA3-1000024..UA3-1005979:UA3-1100009..UA3-1101235
unique_id_feeds:
134988