Submitted by administrator on Wed, 03/04/2015 - 00:53
On certain vehicles, there may be some production damage on the dust boot of the ball joint which connects the lower arm of the front wheel shock absorber and the steering knuckle arm. If left unfixed, mud water may get in from the damaged section of the dust boot, causing the resin of the bearing to become worn out excessively. At worst, the ball stud comes off.
Case Number:
RJ-0645-0
Make/model:
Issued:
Wed, 2000-07-26
Component:
shock absorber arm/rod
Affected:
117 474
Correction:
The dust boot of the lower arm ball joints should be inspected. If any damage is found, that lower arm ball joint should be replaced with a non-defective one.
Identification:
white or yellow paint on the right hand side of the vehicle type plate inside the engine compartment
Vehicle:
Make:
Mitsubishi
Type:
E-E52A
Period:
N/A
Frame / Chassis No:
E52A-0000006..E52A-0307265
Make:
Mitsubishi
Type:
E-E53A
Period:
N/A
Frame / Chassis No:
E53A-0000010..E53A-0302354
Make:
Mitsubishi
Type:
E-E54A
Period:
N/A
Frame / Chassis No:
E54A-0000017..E54A-0303187
Make:
Mitsubishi
Type:
E-E64A
Period:
N/A
Frame / Chassis No:
E64A-00000005..E64A-0300002
Make:
Mitsubishi
Type:
E-E74A
Period:
N/A
Frame / Chassis No:
E74A-0000101..E74A-0302683
Make:
Mitsubishi
Type:
E-E84A
Period:
N/A
Frame / Chassis No:
E84A-0000015..E84A-0300397
Make:
Mitsubishi
Type:
X-E57A
Period:
N/A
Frame / Chassis No:
E57A-0000004..E57A-0300453
Make:
Mitsubishi
Type:
E-E72A
Period:
N/A
Frame / Chassis No:
E72A-0000005..E72A-0300735
Make:
Mitsubishi
Type:
Y-E77A
Period:
N/A
Frame / Chassis No:
E77A-0000005..E77A-0300390
unique_id_feeds:
135084