Submitted by administrator on Wed, 03/04/2015 - 00:53
For catalyst mufflers, a crack may occur on the welded part of the exhaust inlet pipe and the muffler, because the muffler structure for the exhaust inlet pipe is improper, and also because rigidity of the bracket securing the exhaust pipe between the engine and the muffler is insufficient and amount of the vibration-proof rubber on the bracket is also insufficient. If left unfixed, exhaust noise may exceed the standard.
Case Number:
RJ-0902-0
Make/model:
Issued:
Tue, 2002-12-17
Component:
muffler
Affected:
60
Correction:
The catalyst muffler should be replaced with the factory approved replacement unit, and also, the bracket with vibration-proof rubber should be replaced with the factory approved replacement unit.
Identification:
green sticker on the bottom corner of the back of the service hatch located at the right rear
Vehicle:
Make:
Mitsubishi
Type:
KL-MP37JK
Period:
N/A
Frame / Chassis No:
MP37JK-20042..MP37JK-20116
Make:
Mitsubishi
Type:
KL-MP37JM
Period:
N/A
Frame / Chassis No:
MP37JM-20125..MP37JM-20126
unique_id_feeds:
135144