Submitted by administrator on Wed, 03/04/2015 - 00:53
On certain vehicles, the crank angular sensor wire may interfere with the power steering belt, due to the improper method of securing the wire. If left unfixed, in the worst case, the wire gets disconnected, and the engine stops and will not restart. Note: This recall is only for vehicles with 4G93 engine.
Case Number:
RJ-1136-0
Make/model:
Issued:
Wed, 2004-06-30
Component:
engine (crank angular sensor)
Affected:
2 534
Correction:
The crank angular sensor wire should be secured on the timing belt cover with the clip. Also, the wire should be inspected, and the one with damage should be either repaired or replaced with a new one.
Identification:
white or yellow paint on the upper bolt head on the right hood hinge
Vehicle:
Make:
Mitsubishi
Type:
E-EA1A
Period:
10/08/1996..09/09/1997
Frame / Chassis No:
EA1A-0000021..EA1A-0020030
Make:
Mitsubishi
Type:
E-EA1W
Period:
20/08/1996..11/03/1997
Frame / Chassis No:
EA1W-0000005..EA1W-0010303
unique_id_feeds:
135235