Submitted by administrator on Wed, 03/04/2015 - 00:56
The bracket that braces the cooling pipe for the hydrodynamic auxiliary brake attached to the transmission does not have sufficient strength, and it may crack or break from vibration during driving. If the vehicle continues to be driven in such a state, the hose connecting the cooling pipes may come off, allowing a large quantity of cooling water to run off, in which case the engine would burn out and the vehicle would stall.
Case Number:
RJ-1430-0
Make/model:
Issued:
Wed, 2005-05-11
Component:
cooling system
Affected:
384
Correction:
The bracket should be checked, and if it is the one to be recalled (the upper one on the diagram), it should be replaced with the factory approved replacement unit (the lower one on the diagram).
Identification:
white/yellow sticker (marked 'HD-22') near the striker on the rear door pillar on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
KC-FV513HR
Period:
22/10/1996..11/03/1998
Frame / Chassis No:
FV513H-700005..FV513H-700215
Make:
Mitsubishi
Type:
KL-FP50LDR
Period:
22/12/2000..04/03/2004
Frame / Chassis No:
FP50LD-720001..FP50LD-730001
Make:
Mitsubishi
Type:
KL-FP54LDR
Period:
21/09/2000..30/08/2004
Frame / Chassis No:
FP54LD-720001..FP54LD-730016
Make:
Mitsubishi
Type:
KL-FP54LGR
Period:
30/10/2000..20/05/2002
Frame / Chassis No:
FP54LG-720001..FP54LG-720004
Make:
Mitsubishi
Type:
KL-FV50LHR
Period:
30/05/2000..10/02/2005
Frame / Chassis No:
FV50LH-530331..FV50LH-730100
unique_id_feeds:
135796