Submitted by administrator on Wed, 03/04/2015 - 00:58
The electrical wiring for the ABS sensor is not properly routed, and therefore, it may interfere with the brake air pipe. If this problem is left unattended, the air pipe may become damaged and allow air to escape, and in the worst case, the wheel park (parking brake) may be actuated while the vehicle is in motion, and this could cause the vehicle to stall or the braking efficiency to decrease.
Case Number:
RJ-1813-0
Make/model:
Issued:
Tue, 2007-02-06
Component:
brake (brake air pipe)
Affected:
676
Correction:
The routing of the electrical wiring for the ABS sensor should be changed to ensure adequate space from the air pipe. Also, if there is a mark of interference on the air pipe, that section should be removed and repaired with a new pipe and joint fittings.
Identification:
white/yellow sticker (marked 'HD-78') near the striker on the rear door pillar on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
KL-FT54JNY, PJ-FT54JNY
Period:
07/06/2003..21/09/2005
Frame / Chassis No:
FT54JNY-530004..FT54JNY-530087
Make:
Mitsubishi
Type:
KL-FT54JVX, PJ-FT54JVX
Period:
22/05/2003..26/09/2005
Frame / Chassis No:
FT54JVX-530003..FT54JVX-530393
Make:
Mitsubishi
Type:
KL-FT54JWZ, PJ-FT54JWZ
Period:
24/05/2003..11/10/2005
Frame / Chassis No:
FT54JWZ-530006..FT54JWZ-530209
unique_id_feeds:
136091