Submitted by administrator on Wed, 03/04/2015 - 00:58
The engine rear support may not have sufficient strength, and such a support may crack when the vehicle is repeatedly driven on a curvy road. If this problem is left unattended, it may happen that the cracks grow and the support eventually breaks. If such breakage occurs, the engine position may move, and in the worst case, the universal joint of the propeller shaft could break and fall off, which would cause the vehicle to stall.
Case Number:
RJ-1866-0
Make/model:
Issued:
Mon, 2007-04-16
Component:
frame
Affected:
3 995
Correction:
The engine rear support should be checked, and if it is the one that does not have sufficient strength, it should be replaced with the factory approved replacement unit, the universal joint of the propeller shaft should be replaced with a new one, and the engine undercover and the lubricant supply pipe should be replaced with the ones whose shapes have been modified.
Identification:
white/yellow sticker (marked 'HD-69') near the striker on the door pillar on the passenger's side
Vehicle:
Make:
Mitsubishi
Type:
P-FV414JR
Period:
N/A
Frame / Chassis No:
FV414JR-520001..FV414JR-720002
Make:
Mitsubishi
Type:
W-FV414JR
Period:
N/A
Frame / Chassis No:
FV414JR-530001..FV414JR-750002
Make:
Mitsubishi
Type:
KC-FV424JR
Period:
N/A
Frame / Chassis No:
FV424JR-560001..FV424JR-560546
unique_id_feeds:
136151