Submitted by administrator on Wed, 03/04/2015 - 00:58
For vehicles that were converted to concrete pump trucks, the transfer brackets do not have sufficient strength, and therefore, they may crack due to the load caused by concrete casting. If this problem is left unattended, the cracks may progress, and in the worst case, the brackets could break, in which case the transfer could fall, causing the vehicle to stall.
Case Number:
RJ-1946-0
Make/model:
Issued:
Thu, 2007-10-11
Component:
transfer brackets
Affected:
110
Correction:
The transfer brackets should be replaced with the factory approved replacement units, and the shock absorbing rubber cushions should be replaced with new ones.
Identification:
sticker (No. 1946) near the lock striker for the driver's side door
Vehicle:
Make:
Mitsubishi
Type:
KC-FP515JX(modified)
Period:
03/06/1998..27/06/2000
Frame / Chassis No:
FP515JX-500085..FP515JX-500060
Make:
Mitsubishi
Type:
KL-FP50KJX(modified)
Period:
21/08/2000..02/05/2005
Frame / Chassis No:
FP50KJX-520007..FP50KJX-530037
Make:
Mitsubishi
Type:
PJ-FP50JX(modified)
Period:
16/05/2006..07/05/2007
Frame / Chassis No:
FP50JX-540028..FP50JX-540044
unique_id_feeds:
136219