Submitted by administrator on Wed, 03/04/2015 - 00:58
For vehicles that were converted to concrete pump trucks, the transfer brackets do not have sufficient strength, and therefore, they may crack due to the load caused by concrete casting. If this problem is left unattended, the cracks may progress, and in the worst case, the brackets could break, in which case the transfer could fall, causing the vehicle to stall. Note: The same problem was reported as RJ-1946-0 on 11th October 2007, and this RJ-1958-0 is to list additional vehicles to be recalled.
Case Number:
RJ-1958-0
Make/model:
Issued:
Tue, 2007-10-23
Component:
transfer brackets
Affected:
5
Correction:
The transfer brackets should be replaced with the factory approved replacement units, and the shock absorbing rubber cushions should be replaced with new ones.
Identification:
sticker (No. 1958) near the lock striker for the driver's side door
Vehicle:
Make:
Mitsubishi
Type:
KC-FP515JX(modified)
Period:
14/01/1999..28/07/1999
Frame / Chassis No:
FP515JX-510015..FP515JX-510053
Make:
Mitsubishi
Type:
KL-FP50KJX(modified)
Period:
13/03/2001..24/08/2001
Frame / Chassis No:
FP50KJX-520031..FP50KJX-530087
unique_id_feeds:
136225