FUSO CANTER GUTS

RJ-1457-0

Submitted by administrator on Wed, 03/04/2015 - 00:56

For vehicles with independent front suspension, the water prevention measures of the bearings inside the front wheel hubs are improper, and therefore, muddy water can enter inside the bearings and cause rust and/or wear. If this problem is left unattended, vibration and abnormal noise may be generated, and in the worst case, the bearings could be damaged causing the vehicle to stall.

RJ-1406-0

Submitted by administrator on Wed, 03/04/2015 - 00:56

For vehicles with rear disc brakes and single tyres, the water prevention measures of the bearings inside the rear wheel hubs are improper, and therefore, water can enter into the bearings, causing rust and wear. If this problem is left unattended, vibration and abnormal noise may be generated, and in the worst case, the bearings could be damaged, which could cause the vehicle to stall.

RJ-1084-0

Submitted by administrator on Wed, 03/04/2015 - 00:53

For petrol engine vehicles with automatic transmission, capacity of the vacuum brake booster (master vac) is insufficient. Because of this, when the engine idling RPM increases due to automatic engine warming, the braking power may not be sufficient enough for the creeping torque of the torque converter. In addition, if the refrigerator compressor etc. is in operation at the same time, damping force may decrease furthermore. As a result, if the gear is put in D while the engine is not warm enough, operating a brake pedal may not stop the vehicle from moving.